Working with wood flooring materials isn’t an easy job. When high-quality wood is installed well, it can be one of the most beautiful and long-lasting flooring materials on the market.
However, there is one factor that can complicate a wood flooring installation job that many clients don’t know about: moisture. Typically, it’s assumed that any flooring materials are already properly acclimated and free of excess moisture, but such assumptions can be dangerous.
If the moisture content of wood flooring isn’t right, then it can warp, buckle, or even delaminate, causing significant damage and ruining the aesthetic value of the flooring. To make sure that the moisture content of wood flooring is in the right range, many professionals use moisture meters to test their wood materials and subfloors prior to installation.
But, what is the ideal moisture content of wood flooring?
How Humidity Influences Ideal Wood Moisture
Wood is a hygroscopic material, constantly absorbing and giving off moisture until it reaches an equilibrium moisture content with its surroundings.
In short, the more humidity is present in the air, the more moisture wood building materials, such as flooring, will absorb. This has a direct effect on how much wood flooring will expand after installation. As wood absorbs water, it will expand across the grain, which can cause it to swell, warp, and buckle.
By contrast, environments with less humidity tend to make wood lose moisture. Here, the wood will shrink across the grain, which can cause the wood to warp and crack.
For all intents and purposes, the ideal moisture of flooring wood will be the moisture content at which the wood reaches equilibrium with the installation environment.
Ensuring Wood Flooring is at its Ideal Moisture Content
Before you can ensure that your wood flooring is at an ideal moisture content, it’s important to check the relative humidity of the installation site and compare that to the %MC of your wood materials. Here, using a thermo-hygrometer to check temperature and humidity can be invaluable.
In most cases, your installation will probably in a zone with RH values between 40% and 45%. If the temperature of the building is between 75 and 85 degrees, the equilibrium moisture content of your wood should be between 7% and 8%.
However, in some coastal areas, the average RH is in the 58% to 63% range. In these areas, your target RH is probably going to be closer to 11% in most wood materials for an indoor environment.
To ensure that your wood is at the right moisture content for use, check the RH value of the installation site with a thermo-hygrometer, and then check the %MC of your wood flooring with a moisture meter. Doing so can help ensure that your wood floors won’t warp or buckle after the installation is complete.